Dedicated to cleaning hard flooring across kitchens, bathrooms and living spaces
-
Removes tough stains, spills and dry debris
Two motorised counter-rotating microfibre rollers powerfully remove wet and dry dirt, simultaneously.
-
Rollers clean themselves as they go
On every rotation, the rollers extract the dirt before being evenly hydrated – cleaning with clean water from start to finish.
-
Glides effortlessly around furniture
Easy to manoeuvre, so you can quickly change direction. It's also designed to go low – helping you reach awkward spaces.
-
Powerful rotation
Two counter-rotating motorised rollers powerfully remove spills, debris, hair and dried-on stains.
-
Full-width roller hydration
26 hydration points are fed by a pulse-modulated pump for even water application to the rollers. So you clean with clean water from start to finish.
-
Highly absorbent rollers
Densely-packed microfibre of 64,800 filaments per cm² delivers high absorption for a clean finish.
-
Roller cleaning and waste separation
Secondary brush bars with nylon bristles remove large debris and hair from the rollers – while extraction plates squeeze off moisture. Debris collects in a removable tray, and waste liquid is pumped into a separate Dirty water tank.
Hydration controls
Select the hydration level to suit your clean
This is a carousel with slides. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
Tackle anything from light spills, to sticky liquids and dried stains.
Choose from three hydration levels – 1, 2, or 3. And you can fine tune each of these by three further sensitivity levels.
Tackle anything from light spills, to sticky liquids and dried stains.
Choose from three hydration levels – 1, 2, or 3. And you can fine tune each of these by three further sensitivity levels.
Or, for really hard-to-remove stains such as toothpaste, coffee, sauces and syrups, select MAX mode to increase water flow to its fullest.
Or, for really hard-to-remove stains such as toothpaste, coffee, sauces and syrups, select MAX mode to increase water flow to its fullest.
-
Level 1
For debris, hair and light spills.
-
Level 2
For mealtime mess, spills and wet footprints.
-
Level 3
For sticky spills, muddy boot marks and dried-on stains.
-
Dirty water tank
Waste liquid is pumped into the Dirty water tank. It’s easy to remove the tank and to pour its contents away – for hygienic, no-touch disposal.
-
Debris tray
Dirt and debris collect in a quick-release, removable tray – for hygienic, no-touch disposal straight into your bin.
Frequently asked questions
Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.
Dyson WashG1™ wet cleaner has counter-rotating motorised rollers – instead of vacuum suction – to separate large debris from liquids. Vacuum motors may also expel air back into the room which could cause odours.
Dyson WashG1™ wet cleaner has 3 Modes (levels 1, 2 and 3), plus a MAX setting. Levels 1 and 2 are for dry dust, hair and fibre and low viscosity spillages. Level 3 is for dry debris and high viscosity spillages. MAX setting is for stubborn dirt. You can switch between modes using the blue button.
No. Vacuuming is not necessary, as Dyson WashG1™ wet cleaner picks up and separates both wet and dry debris, and hair.
Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris. You will need a vacuum cleaner for your carpets, upholstery, mattresses, pet beds, countertops, and inside your car.
It can clean everything from fine dust, small debris and hair, to splashes and spillages, all the way to heavier spillages such as ketchup, syrup and oil mist – even stubborn stains such as dried food and toothpaste.
The Clean water tank has a 1 litre capacity whilst the Dirty water tank has a 0.8 litre capacity.
Up to 290sqm, based on Dyson internal calculation with no repeated cleaning on the same area, with 0.5m/s speed. Actual area coverage may vary depending on habits and floor types.
The Dyson WashG1™ doesn’t need to be cleaned manually after every clean. Instead, we recommend using the Self-clean function after each use. We also recommend cleaning the Dyson WashG1™ manually after every three uses.
Place the machine on the dock after each clean, to store and charge, ready for next time.
The Dyson WashG1™ wet cleaner is our first dedicated wet floor cleaner, engineered to wash hard floors. The Dyson Submarine™ is Dyson’s multifunctional vacuum cleaner, which includes a precision-engineered wet roller head, dust illumination and anti-tangle technologies.
Turn the machine on and off via the red power button underneath the UI screen.
No, Dyson WashG1™ wet cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.
Apart from the charging dock, the Dyson WashG1™ wet cleaner has everything you need onboard. No additional accessories.
No, this machine is engineered for hard floors only.
We recommend replacing the rollers every 6 months, depending on usage. The user screen displays an alert to remind you to replace the rollers.
- 1 According to Dyson internal methods, tested on ceramic tile and wood.
- 2 Based on Dyson internal calculation with no repeated cleaning on the same area, with 0.5m/s speed. Actual area coverage may vary depending on habits and floor types.
- Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.
