Buy from Dyson.co.uk
-
Dyson Submarine™ wet roller head
Washes hard floors with clean water.
-
Fluffy Optic™ cleaner head
Detects particles you don’t normally see.¹
-
Digital Motorbar™ cleaner head
Powerfully sucks up dust and hair from all floors.
Washes hard floors all around your home
Dyson Submarine™ wet roller head is engineered to clean tile, stone, wood, ceramic, vinyl, linoleum and laminate floors.
Dyson Submarine™ wet roller head technology
Intelligent technology
Powerful Dyson performance
-
Powerful suction
A Dyson Hyperdymium™ motor spins at up to 125,000rpm to deliver powerful suction and a comprehensive deep clean.⁵
-
Root Cyclone™ technology
14 root cyclones generate forces of up to 100,000g to remove dust from the airflow – with no loss of suction.⁶
-
Up to 60 minutes of run time⁷
Advanced seven-cell battery provides fade-free power for whole-home deep cleaning. Easily swap with an additional battery (available separately) for even longer cleans.
Advanced filtration
-
Multi-stage filtration
Fully-sealed filtration system traps and seals in microscopic dust, expelling cleaner air.
-
Captures microscopic particles
Removes particles as small as allergens, mould spores, dust mites, and pet dander – for a cleaner, healthier home.
Frequently asked questions
Should I use detergent when wet cleaning?
Whilst not necessary for cleaning performance, we understand that some users will want to combine a cleaning detergent with the wet roller head. If you decide to use detergent, please follow the manufacturers guidance on the recommended dilution. We do not recommend putting neat detergents in the clean water tank.
Should I vacuum before wet cleaning my floor?
To achieve the best deep cleaning results, it’s suggested to dry vacuum before wet cleaning the floor.
If there is a substantial number of dry debris on your floor, and you are not cleaning a spill or wet debris, we recommend vacuuming your floor before wet cleaning it to achieve the best cleaning performance. Do not vacuum up any spills or wet debris in dry mode as this could damage your vacuum cleaner.
Can I use it on my existing Dyson V15 Detect™ vacuum?
The Submarine wet roller head is not compatible with any of our other vacuums, including pre-purchased Dyson V15 Detect™ vacuum. To intelligently switch between wet and dry cleaning, this version of the machine has been reprogrammed. Our previous software is not compatible with wet floor cleaning.
How often do I need to change the water in clean water tank?
Refill the water to full when the water is running low in the clean water tank. With a full tank of water, the Dyson Submarine™ wet roller head supports 16 minutes run time before the clean water runs out. To help protect the motor in the wet roller head, we recommend you do not run the product when the clean water tank is empty.
Do I need to set the cleaning mode?
No, our Dyson V15s Detect Submarine™ wet and dry vacuum has intelligent mode detection. As soon as wet roller head is attached, your Dyson V15s Detect Submarine™ wet and dry vacuum will automatically enter wet cleaning mode.
How do I know when the clean water tank is empty/needs refilling?
The clean water tank is transparent, and owners will be able to see how much water is remaining in the clean water tank during cleaning. Please refill the water tank when the water amount is running low. With a full tank of water, the Dyson Submarine™ wet roller head supports 16 minutes run time before the clean water runs out.
Find your new floor cleaner
¹Laser engineered for hard floors. Effectiveness of laser influenced by ambient light conditions, debris type and surface.
²Compared to the original Dyson Laser Slim Fluffy™ cleaner head. Effectiveness influenced by ambient light conditions, debris type and surface.
³Dynamnic Load Sensor technology only applies in Auto mode with the High Torque cleaner head attached.
⁴Best accuracy achieved in Auto mode. Auto ramp feature in Auto mode only. Testing based on average in home usage according to Dyson internal test data. Microscopic dust is defined as particles less than 100 microns.
⁵Suction tested to EN IEC62885-4 CL5.8 and CL5.9, tested at the flexible inlet, loaded to bin full, in Boost mode against the cord-free stick market. (Sales data from Apr 2020 to Mar 2021).
⁶Suction tested to EN IEC62885-4 CL5.8 and CL5.9, loaded to bin full, in Boost mode.
⁷Applies in eco mode on hard floor. Actual run time will vary based on power mode, floor type and/or attachments used.
⁸Filtration tested against EN IEC62885-4 CL5.11 in Boost mode.
⁹Based on the calculation subject to one full water tank, running at 0.5m/s with a single pass until the water tank depletes. The actual usage area may vary in use and floor condition
Buy from Dyson.co.uk