Charging your battery
It's important to charge the battery before using your vacuum for the first time. This helps the battery monitoring system's algorithm more accurately calculate remaining run time.
Dock set up and charging
You will receive one of the following docking stations with your machine.
Fitting the Wall Dok™
Before setting up the wall dok™, please download your user manual and read the instructions carefully. Or watch our video guide.
Setting up your Floor Dok™
Before setting up your Floor dok™, please download your user manual and read the instructions. Or watch our how-to video below.
Features
Get to know your LCD screen and power modes
Getting to know your cleaner heads
Your Dyson V15s Detect Submarine™ wet and dry vacuum cleaner is engineered for all-in-one cleaning power.
Simply switch the cleaner head according to the cleaning task and surface.
Dyson Submarine™ wet roller head
Washes hard floors – tile, stone, wood, ceramic, vinyl, linoleum and laminate. The motorised wet roller picks up liquids, debris and tough stains. For best results, it's important to wash the Dyson Submarine™ wet roller head after every use.
-
Fluffy Optic™ cleaner head
Cleans hard floors. Dyson illumination makes invisible dust visible on hard floors, showing you where to clean. Anti-static black carbon fibre filaments pick up fine particles from hard floors and crevices.
-
Digital Motorbar™ cleaner head
Deep cleans carpets and rugs. The motorised brush bar drives stiff nylon bristles into carpet to remove deep-down dust. Polycarbonate hair removal vanes automatically de-tangle hair from the brush bar as you clean.
Essential maintenance
Watch our video guides on how to keep your machine performing at its best.
-
Washing your brush bar
To maintain performance, clean your machines washable brush bar. Simply detach, wash with cold water, leave to dry and then reattach.
-
Emptying and cleaning the bin
You can help to maintain suction by emptying the bin before the debris reaches the MAX line. Remove the bin from the machine to clean thoroughly.
-
Checking for blockages
If your machine detects a blockage, the motor will pulse six times to alert you – and you won't be able to continue until the blockage is cleared. Remove the wand, bin and cleaner head to find and clear the blockage.
Changing the battery
The battery detaches in a click, without the need for screws. So it's easy to uninstall and replace.
How to wash the filter
Your vacuum has a washable filter. We recommend washing it once a month to maintain optimum suction power.
-
1. Turn off the power
Remove your vacuum from the docking station and twist the filter counter clockwise to remove it from the body.
-
2. Remove dust and debris
Tap your filter unit lightly on the side of the sink or bin, to remove loose dust and debris.
-
3. Wash the filter
Wash the filter with cold tap water, gently squeezing the water out with your hands. Avoid using detergent or washing in a dishwasher or washing machine.
-
4. Gently shake
Fill the inside with water, cover both sides with your hands, and shake lightly. Wash until the water is clear.
-
5. Dry for at least 24 hours
Allow the filter to air dry in a well-ventilated area for at least 24 hours, with the wide mouth facing down.
-
6. Let it dry completely
Your filter must be completely dry before you return it to your machine, or it could damage the motor. Do NOT dry in a tumble dryer, microwave or near a naked flame.
Dyson V15s Detect Submarine™ accessories
Dyson-engineered accessories are ergonomically designed for cleaning up high, down low – and everywhere around your home.
-
Scratch-free dusting brush
Gentle on delicate surfaces. Self-cleaning – a rotating cuff keeps the soft bristles clear of dust.
-
Awkward gap tool
Long and narrow, with a 22° twist to clean car storage compartments, tight gaps and hard-to-reach places.
-
Extension hose
Adds up to 61cm of flexible reach to any non-powered tool attachment, to clean up high or down low in your home or car.
-
Built-in dusting and crevice tool
Wand detaches in a click to reveal a ready-to-go crevice tool stored inside for on-the-spot cleans.
-
Hair screw tool
Anti-tangle conical brush bar picks up long hair and pet hair – and spirals it straight into the bin. Fast.
-
Crevice tool
Engineered for precise cleaning around tricky edges and into hard-to-reach narrow spaces.
-
Combination tool
Two tools in one – wide nozzle and brush, for quick switching between cleaning and dusting tasks around your home or car.
FAQs
The wet roller can be washed with a common household anti-bacterial detergent, diluted according to the manufacturer's recommended ratio. We recommend doing this after each clean to maintain hygiene.
Only the Dyson Submarine™ wet roller head should be used to pick up wet debris and liquid spills. Engineered with intelligent power diversion and mode detection, all aspects of wet cleaning are contained within the wet roller head.
The Dyson Submarine™ wet roller head is not compatible with any of our other vacuums, including pre-purchased V15. To intelligently switch between wet and dry cleaning, this version of the machine has been reprogrammed. Our previous software is not compatible with wet floor cleaning.
The Dyson Submarine™ wet roller head has been engineered for hard floors.
We recommend replacing the wet roller every six months, depending on how often you use your machine, to help maintain optimum performance.
